Technician measuring voltage at an outdoor electrical panel.

Electrical repair · Paulding County · from Kennesaw

Electrical Repair in Dallas, GA

KEC has served Metro Atlanta for 46 years. We repair electrical systems in Dallas and Paulding County, and we are available 24/7.

  • 46 years in Metro Atlanta
  • Available 24/7
  • Permits pulled and included in quotes

Need electrical repair in Dallas? KEC Electrical Contractors works from Kennesaw and serves Dallas, the Paulding County seat, along with the rest of the county. We have been in Metro Atlanta for 46 years, and we are available 24/7. This page is for electrical repair in Dallas. For the county-wide guide, see Paulding County electrician.

Call (404) 861-3098 for a quote. Every job’s price is different, which is why we look at the setup first.

Electrical repair in Dallas homes

Historic downtown Dallas, around the courthouse and U.S. 278, includes older homes and storefronts where repairs often start with worn services, lighting, and panels that have been added onto over the years. Around the city, rapid growth produced large subdivisions with 1990s-to-today wiring, finished bonus rooms, and outdoor circuits on wooded lots. At the edges, rural acreage and shop buildings may still be on an older service that needs a review before you add a generator or an EV charger. We serve Downtown Dallas, the city’s historic downtown around the courthouse square. It is the most prominent documented place in the incorporated city now that Bentwater, whose official club address is in Acworth, is featured on the Acworth pages instead. Homes and buildings in historic downtown Dallas often need a panel upgrade or a service review before a standby generator or an EV charger, plus LED and landscape lighting, a home theater or media room, and a Lutron Caséta, RadioRA 3, or HomeWorks lighting and shade plan, including motorized shades programmed with the lighting. We also design and install Crestron systems. Every house is different; we look at the setup and give you a quote.

A Dallas mailing address can sit inside the city or in unincorporated Paulding County, and some nearby homes use a Hiram or Powder Springs address. Hiram is closer to the Cobb line; we still confirm the parcel before we pull a permit rather than assuming the office from the mail.

Electrician's hands working on an open circuit-breaker panel.

When to call for electrical repair in Dallas

Call if outlets are loose or dead, lights flicker or dim when a large appliance starts, breakers trip more than once, switches feel warm, or a room has gone dark while the rest of the house still has power. After a North Georgia storm, call if you have a damaged weatherhead, a meter that will not reset, or water in a fixture or panel.

Call anytime, 24/7, if you smell burning, see sparking, hear arcing, have a downed line on the property, or are not sure it is safe to stay in the house. KEC is available around the clock. We do not publish a standard arrival window. We will give you a timeline when we take the call.

Permits and utilities in Dallas

Inside the city, Dallas Community Development issues its own permits. If the house is in unincorporated Paulding County, the permit comes from Paulding County Building & Permitting at 240 Constitution Blvd. KEC checks the parcel, pulls the required permit, schedules the inspection, and includes that work in the quote.

Paulding addresses may be served by GreyStone Power, headquartered in nearby Hiram, Cobb EMC, Georgia Power, or Carroll EMC. Confirm the name on your bill. We coordinate with the utility that serves the house and give you a timeline with your quote.

Smart electricity meters on a residential exterior wall.

How we quote the work, and other services

Every job’s price is different. The house, the circuit, whether a permit is required, and whether the utility has to be involved all change the scope. We look at the setup, write a quote, and give you a timeline with that quote.

Along with electrical repair, KEC installs EV chargers, standby generators, and whole-home surge protection; upgrades electrical panels; does LED lighting, including residential retrofits, recessed and can lights, landscape lighting, and commercial LED work; repairs and installs home theaters and movie theaters, including projectors, TV mounting, and audio; and designs, programs, and supports Lutron Caséta, RadioRA 3, and HomeWorks, including motorized shades programmed with the lighting. We also design and install Crestron systems and other smart-home automation.

See also electrical repair in Powder Springs and Acworth, and our Cobb County and Bartow County hubs.

FAQ

Do I need a permit for electrical repair in Dallas?

It depends on the work and the parcel. Many repairs that involve new circuits or a service change require a permit and inspection. Inside the city, Dallas Community Development issues the permit. Unincorporated Paulding County goes through Paulding County Building and Permitting. KEC checks the parcel and handles the permit.

Which power company will you work with in Dallas?

It depends on the address. Dallas-area homes may be served by GreyStone Power, Cobb EMC, Georgia Power, or Carroll EMC. Confirm the name on your bill. We coordinate with the utility that serves your house.

Are you available 24/7 for an electrical emergency?

Yes. KEC is available 24/7. Call (404) 861-3098 anytime. We do not publish a standard arrival window; we will give you a timeline when we take the call.

Do you serve Hiram and the rest of Paulding County as well as Dallas?

Yes. We serve Dallas, Hiram, Braswell, and unincorporated Paulding County, as well as nearby west Cobb. Call (404) 861-3098.

Do you do LED lighting or home theater work as well as electrical repair?

Yes. LED work includes residential retrofits, recessed and can lights, landscape lighting, and commercial projects. We also repair and install home theaters and movie theaters, including projectors, TV mounting, and audio. Every job’s price is different. Call (404) 861-3098 for a quote.

Call KEC for a quote

Every Dallas house is different, and every job’s price is different. Tell us what is going on. We will look at the setup, explain the options in plain language, and give you a clear written quote.

Call KEC at (404) 861-3098 for a quote

KEC Electrical Contractors · 2070 Attic Pkwy Suite 401, Kennesaw, GA 30152 · info@kecatl.com · Hours: 24/7

Call (404) 861-3098