
Based on Attic Pkwy in Kennesaw · Serving Cobb County & Metro Atlanta
Electrical Panel Upgrades in Kennesaw, GA
KEC has served Metro Atlanta for 46 years. We pull the permit, include it in your quote, and are available 24/7 if the panel cannot wait.
- 46 years in Metro Atlanta
- Available 24/7
- Permits pulled and included in quotes
Need a panel upgrade in Kennesaw? KEC Electrical Contractors is based on Attic Parkway. We replace outdated or overloaded panels, move homes from 100-amp to 200-amp service when a load calculation supports it, and handle the permit and the utility visit with you.
We have done this work in Metro Atlanta for 46 years, and we are available 24/7. Call (404) 861-3098 for a quote. Every job’s price is different, which is why we look at your setup first.
Why Kennesaw homes outgrow their panels
Many houses in Kennesaw and nearby Cobb County were built in the 1980s and 1990s with 100-amp or 150-amp service. That may not be enough once you add central air, a finished basement, a home office, an EV charger, or a standby generator. KEC installs EV chargers, generators, and whole-home surge protection, and we can plan those into the same visit when they belong on the job.
200-amp service is the common modern standard for a single-family home with those kinds of loads. Replacing a panel at the same amperage is a different job from increasing the service size. Going from 100 amps to 200 amps usually means the service entrance, and often the meter, have to change too.

Signs it may be time for a panel upgrade
Common reasons Kennesaw homeowners call us: breakers that trip when everyday appliances run together, lights that dim when a large load starts, a panel that is full, or a house that still has a fuse box or an older Federal Pacific or Zinsco panel.
A fuse box is not automatically unsafe, but after an inspection we recommend replacement with a modern breaker panel, and often a service upgrade, rather than treating it as a long-term repair. The same is true for confirmed Federal Pacific or Zinsco equipment: after an inspection, we recommend replacing the whole panel rather than swapping individual breakers. See 8 Signs Your Electrical Panel Is Outdated for a longer walkthrough.
If the panel is warm, rusted, buzzing, or has a burning smell, treat it as urgent. Do not open the cover. If it is safe, turn off the affected breaker and call (404) 861-3098. We are available 24/7. If a line is down outside, stay clear and call your utility first.

Permits in Kennesaw: the city or Cobb County?
Panel replacements and service upgrades need an electrical permit and inspection. Who issues it depends on the parcel, not just the mailing address. Inside Kennesaw city limits it is the City of Kennesaw Building Services department. Many homes with a Kennesaw mailing address, especially in the 30152 zip code, are in unincorporated Cobb County, so their permits come from Cobb County Community Development. KEC checks the jurisdiction, pulls the permit, schedules the inspection, and includes that work in the quote.
When the meter or service size changes, Georgia Power or Cobb EMC has to disconnect power and later reconnect it. We coordinate that step as part of the job and will give you a timeline with your quote.
How KEC quotes a panel upgrade
Every home is different. The amperage, the meter and service entrance, wiring and code updates, access, grounding and surge needs, permits, and utility coordination all affect the work. That is why we quote after a site visit: we look at the setup, give you a written quote, pull the permit, coordinate the utility when needed, then install the new equipment and meet the inspection.
For more on what drives the scope, see Panel Upgrade Cost in Kennesaw & Metro Atlanta. Our Kennesaw electrician page covers local housing and permits in more detail.

Panel upgrade FAQ
Do I need a permit for a panel upgrade in Kennesaw?
Yes. Panel replacements and service upgrades require an electrical permit and inspection. The City of Kennesaw issues permits inside city limits; Cobb County issues them for many nearby homes in unincorporated Cobb, even if the mailing address says Kennesaw. KEC pulls the permit, schedules the inspection, and includes that work in the quote.
Should I stay at 100 amps or upgrade to 200 amps?
It depends on how the house uses power now and what you plan to add. A like-for-like replacement can be the right path if the service size is already adequate. If you already run near the limit, or you plan to add a major load such as an EV charger or a generator, upgrading to 200 amps at the same time is often the better long-term choice. A load calculation will tell you which path fits the house.
Will my power be off during the work?
Yes. Power is off while the service equipment is being changed. We will give you a timeline for the outage and any utility scheduling with your quote.
Do you handle emergencies if the panel is unsafe right now?
Yes. Call anytime — KEC is available 24/7 — at (404) 861-3098 if you smell burning, see sparks, or hear buzzing.
Can I get a quote from a photo of my panel?
A photo helps us prepare, but it is not enough for a firm quote. The meter, the service entrance, grounding, wiring at the panel, and access all affect the scope. Plan on a site visit, then we will write a quote for your house.

Call KEC for a panel upgrade quote
Every home is different, and every job’s price is different. If your breakers trip, your panel is out of space, or you are planning a remodel, we will look at the setup, explain the options in plain language, and give you a clear written quote.
Call KEC at (404) 861-3098 for a quoteKEC Electrical Contractors · 2070 Attic Pkwy Suite 401, Kennesaw, GA 30152 · info@kecatl.com · Hours: 24/7