
Lutron & Crestron lighting, shades & home automation · Metro Atlanta
Lutron Lighting & Home Automation in Metro Atlanta
KEC designs and installs Lutron lighting and home automation for homes in Buckhead, Brookhaven, Marietta, and Kennesaw. 46 years in Metro Atlanta. Available 24/7.
- 46 years in Metro Atlanta
- Available 24/7
- Permits pulled and included in quotes
KEC Electrical Contractors designs and installs Lutron lighting and home automation for Metro Atlanta homes. We are electricians first, based in Kennesaw on Attic Parkway, and we treat lighting control as electrical work: correct wiring, load calculations, and a system that can pass inspection when a permit is required.
Call (404) 861-3098 for a quote. Every job’s price is different, because every house and every lighting plan is different.
Lighting control that fits the house
KEC designs, programs, and supports all three current Lutron residential lines: Caséta, RadioRA 3, and HomeWorks. They range from a few well-placed dimmers to whole-home lighting control, with keypads that set scenes for everyday living, entertaining, or winding down.
The point is not a gadget for its own sake. It is light that works the way you actually use the rooms: a single button for “we’re home,” outdoor lighting that comes on at dusk, and fewer walls of mismatched switches. In Buckhead and Brookhaven that often means tying lighting into a larger renovation. In Marietta and Kennesaw it is just as often a retrofit in a house that is already lived in. KEC also designs and installs Lutron motorized shades, and can program the shades together with the lighting so one scene handles both.

Built as electrical work, not just a handoff
Lighting control fails when the electrical side is an afterthought. Dimmers, keypads, and shade power need the right circuits, the right loads, and a panel that can support them. If your service is already at its limit, we will say so before anyone orders equipment. KEC also handles panel upgrades and is available 24/7 if something in the electrical system needs attention before the project can start.
When the work requires a permit — new circuits, a panel change, or other work beyond a simple device swap — KEC pulls the permit, schedules the inspection, and includes that work in the quote. Who issues the permit depends on the address. In and around Kennesaw it may be the City of Kennesaw or Cobb County Community Development. In other Metro Atlanta cities it is the local building department for that parcel.

Homes we work on in Buckhead, Brookhaven, Marietta, and Kennesaw
This is work we do across Metro Atlanta, with four areas that come up often:
- Buckhead and Brookhaven, where lighting control and Lutron motorized shades are frequently part of a remodel or a new finish-out.
- Marietta, including older houses that need a careful retrofit rather than a tear-out.
- Kennesaw, including our own backyard on Attic Parkway, new construction, and existing homes that want better control without a full gut.
KEC does both. If you are planning a new build, the cleanest path is to design the lighting and control layout before drywall goes up. If the house is already finished, we start with a walkthrough of how you use the rooms and what the existing wiring will support, then plan a retrofit around that.

How a Lutron project with KEC usually starts
We walk the house or review the plans, talk through how you want the lighting to feel in each space, and then give you a written scope and quote. The quote reflects the equipment, the electrical work, programming, and any permit the job requires. There is no single package that fits every Buckhead townhome and every Kennesaw two-story, which is why we do not publish a flat figure.
KEC has done this kind of electrical work in Metro Atlanta for 46 years. We also design and install Crestron systems when that platform is a better fit for the house. You can reach us at (404) 861-3098 anytime — we are available 24/7 — or start with a planned visit if the project is not urgent.
Lutron lighting and home automation FAQ
Do you design and install Lutron lighting in existing homes, or only in new construction?
Both. KEC designs lighting control for pre-drywall new construction and for retrofits in finished homes. The site visit is what tells us what the existing wiring will support.
Can Lutron lighting work with motorized shades?
Yes. KEC offers Lutron motorized shades and can program them together with the lighting so a single scene can handle both. Ask us about shades when we walk the house, so the quote covers the full plan.
Do I need a permit for a Lutron installation?
It depends on the scope. Replacing a switch with a compatible dimmer on the same circuit is different from adding circuits, running new wiring, or changing the panel. When a permit is required, KEC pulls it, schedules the inspection, and includes that work in the quote.
Which parts of Metro Atlanta do you serve?
We serve Buckhead, Brookhaven, Marietta, Kennesaw, and the rest of Metro Atlanta, from our office at 2070 Attic Pkwy Suite 401, Kennesaw.
How do I get a quote?
Call (404) 861-3098 or request a quote. Every home is different, and every job’s price is different, so we write the quote after we understand the house and the lighting plan.

Call KEC for a Lutron lighting quote
Every home is different, and every job’s price is different. Tell us how you want the lighting to work, and we will give you a clear written quote for the electrical work and the Lutron system that fits.
Call KEC at (404) 861-3098 for a quoteKEC Electrical Contractors · 2070 Attic Pkwy Suite 401, Kennesaw, GA 30152 · info@kecatl.com · Hours: 24/7