Technician measuring voltage at an outdoor electrical panel.

Areas we serve · Acworth

Electrician in Acworth, GA

Electricians serving Acworth homes for 46 years, based just down the road in Kennesaw.

  • 46 years in Metro Atlanta
  • Available 24/7
  • Permits pulled and included in quotes

Need an electrician in Acworth? KEC handles panel upgrades, EV chargers, standby generators, whole-home surge protection, and 24/7 emergency calls. Call (404) 861-3098 for a quote.

A North Cobb electrician who already knows the area

KEC is based at 2070 Attic Pkwy, Suite 401, in Kennesaw. We work near historic downtown and Lake Acworth, in later subdivisions, and in newer construction at the city’s edges. We serve Brookstone, an established golf-and-country-club community along Cedarcrest Road in Acworth. Homes in Brookstone often need a panel upgrade or a service review before a standby generator or an EV charger, plus LED and landscape lighting, a home theater or media room, and lighting control — including Lutron Caséta, RadioRA 3, and HomeWorks, motorized shades programmed with the lighting, and Crestron systems we design and install. We also serve homes at Bentwater, a golf-club community whose official club address is 100 Golf Links Drive, Acworth, on the Dallas–Acworth line in north Paulding, and at Governors Towne Club, a gated golf-and-country-club community whose club and HOA both use an Acworth 30101 address and whose homes span Cobb and Paulding. We confirm the parcel before we pull a permit. Every house is different; we look at the setup and give you a quote.

An “Acworth, GA” mailing address is not the same as living inside the city. The City of Acworth states that Acworth mailing addresses can be found in Cobb, Cherokee, Paulding, and Bartow Counties, that city residents live in Cobb County only, and that some people inside the city even have a Kennesaw mailing address.

KEC serves the City of Acworth plus Cherokee, Paulding, and Bartow counties and their cities — including Woodstock, Canton, Holly Springs, Dallas, Hiram, and Cartersville. We check the parcel before we pull a permit. See our Cherokee, Paulding, Bartow, and Cobb County electrician guides.

Neatly wired breaker panel with labeled circuits.

Electrical services for Acworth homes

Wiring for Acworth’s homes, old and new

Around historic downtown and the older streets near the depot, houses may still have 100-amp service or a tight panel. Toward Lake Acworth and in later subdivisions, the more common issues are full panels and no room left for an EV charger or a generator.

Newer construction often needs more circuits or lighting control after the builder is done. In an HOA neighborhood, check the covenants before exterior work. After an inspection, we recommend replacement of fuse boxes and of Federal Pacific or Zinsco panels when the condition of the equipment calls for it.

Close-up of an organized residential circuit-breaker panel with color-coded wiring.

Permits: City of Acworth or another office?

Most electrical work beyond simple repairs needs a permit, including new circuits, panel replacements, and service upgrades. Who issues it depends on the parcel, not the mailing city.

Inside the city, Building Services issues electrical permits. If your mail says Acworth but the house is in unincorporated Cobb County, the permit comes from Cobb County Community Development.

Acworth mailing addresses in other counties follow that county’s rules. Unincorporated Cherokee and Waleska go through the Cherokee County Development Service Center; Woodstock, Canton, and Holly Springs have their own building departments. In Paulding, Building & Permitting handles unincorporated parcels; Dallas has its own Community Development permitting. In Bartow, Building Services permits unincorporated areas and directs Adairsville work to the city first; Cartersville’s Building Department issues city permits.

KEC checks the jurisdiction, pulls the required permit, schedules the inspection, and includes that work in the quote. See electrical permits in Kennesaw and Cobb County for the Cobb side.

Power companies: Acworth Power, Georgia Power, or Cobb EMC

Acworth Power, the city’s municipal utility since 1906, serves the City of Acworth and portions of Cobb and Bartow Counties. Other addresses may be on Georgia Power, Cobb EMC, GreyStone Power in parts of Paulding, west Cobb, and Bartow, or Amicalola EMC in rural Cherokee and Bartow. Confirm the name on your bill. We coordinate with the utility that serves the house and give you a timeline with your quote.

Smart electricity meters on a residential exterior wall.

Storms and 24/7 emergency calls

North Cobb and the Lake Allatoona side of Acworth see strong summer thunderstorms. If you smell burning, see sparks, hear buzzing from the panel, or lose power to part of the house while neighbors still have it, turn off the affected breaker if it is safe and call (404) 861-3098. If a line is down outside, stay clear and call your utility first. KEC is available 24/7. We do not publish a standard arrival window.

Acworth electrical FAQ

Do I need a permit for a panel upgrade in Acworth?

Yes. Panel replacements and service upgrades require an electrical permit and inspection. Inside the city, City of Acworth Building Services issues it. Outside the city, the permit comes from the city or county that has the parcel — often Cobb, sometimes Cherokee, Paulding, or Bartow. KEC checks the jurisdiction and handles the permit.

Which power company will you work with in Acworth?

It depends on the address. Acworth Power serves customers throughout the City of Acworth and portions of Cobb and Bartow Counties. Other area homes may be on Georgia Power, Cobb EMC, GreyStone Power, or Amicalola EMC. We coordinate with the utility that serves your house.

How does KEC quote a panel upgrade or an EV charger in Acworth?

Every job’s price is different. The service size, the panel, the permit office, and the utility all affect the work. We give a written quote after a site visit. Call (404) 861-3098.

Do you handle electrical emergencies in Acworth?

Yes. KEC is available 24/7. Call anytime at (404) 861-3098, describe what is happening, and we will tell you whether it is safe to wait and how we can help.

Do you serve only the City of Acworth?

No. We serve the City of Acworth, Cobb County, and Cherokee, Paulding, and Bartow counties and their cities, as well as the rest of Metro Atlanta. Because mailing addresses and city limits often disagree here, we confirm the parcel before we pull a permit.

Call KEC, your Acworth electrician

Tell us what is going on, and we will give you a clear quote. Every job’s price is different. Call (404) 861-3098 · Request an estimate

See also Kennesaw, Marietta, and electrical repair in Acworth.

Call KEC at (404) 861-3098 for a quote

KEC Electrical Contractors · 2070 Attic Pkwy Suite 401, Kennesaw, GA 30152 · info@kecatl.com · Hours: 24/7

Call (404) 861-3098